Categories
Contact Us
Video explanation of metal stretch test-think twice about detection
1. Start the test equipment 2. First open the test software online, select the sensor, extension meter 3. Select the test plan and standard, set the tensile test speed required by the test; select the required
Golden Autumn Event- -Shenzhen Sansi Testing Technology Co., Ltd. sponsors the 2023 National Plastic Mechanics Conference
Shenzhen Sansi Testing Technology Co., Ltd., together with its subsidiary Sichuan Zhongding Dasheng Technology Co., Ltd., fully supported the holding of this event, and brought the micro-electronic universal test machine to support the mechanics conference.
The characteristics of the electro-hydraulic servo system are briefly described
The electro-hydraulic servo system, also known as the tracking system, is an automatic control system, in which the actuator can act automatically, quickly and accurately, in accordance with the changes of the input signals. At the same time, the system also plays the role of the signal power amplification. This system
Think twice- -three point bending performance test explanation
Three-point bending performance test procedure (please watch the test video for details): Prepare test samples, three-point bending fixture, prepare two sets of support rollers, R5 roller with a radius of 5mm, and R2 roller with a radius of 2mm. according to the standard specification: the thickness of this sample test is greater than 3mm, so we need to choose this support roller with a radius of 5mm.
Industry Application - Analysis of the Application of Three Think Mechanics Testing Machine in the Construction Industry
In the construction industry, a key element is quality control. Below, Sansi Testing Company will analyze the application of mechanical testing machines in the construction industry. Reinforced concrete structures are the basic structural form of modern buildings. Steel bars as reinforced concrete buildings
Quick News | The promotion and training of the new version
On the morning of August 9, 2023, the first training course on the promotion and implementation of the new version of the "Criteria for Qualification Accreditation and Evaluation of Inspection and Testing Institutions" and the writing of management system documents in our province was held in Changsha. Li Runlun, Second level Inspector of Hunan Provincial Department of Industry and Information Technology, Hunan Association for Science and Technology